• 1 - Tapetech Easy Clean Pump
• 1 - Tapetech Box Filler

• 2 - TapeTech Flat Boxes (10" and 12")

• 1 - 34" Tapetech Flat Box Handle 

• 1- Easy Clean ® Pump,
• 1 - Box Filler
• 1 - TapeTech 3" Easy Roll ® Angle Head
• 1 - Angle Head Handle
• 1 - TapeTech 8" Angle Applicator w/Handle
• 1 - TapeTech Angle Roller w/Handle

• 2 - TapeTech Flat Boxes (10"and 12")

• 1 - 34" Flat Box Handle 

• 1- Easy Clean ® Pump,
• 1 - Box Filler
• 1 - TapeTech 3" Easy Roll ® Angle Head
• 1 - Angle Head Handle
• 1 - TapeTech 8" Angle Applicator w/Handle
• 1 - TapeTech Angle Roller w/Handle

• 2 - TapeTech Flat Boxes (10"and 12")

• 1 - Xtender Flat Box Handle 

• 1 - TapeTech Automatic Taper
• 1 - Easy Clean ® Pump,
• 1 - Gooseneck & Box Filler
• 1 - TapeTech 3" Easy Roll ® Angle Head
• 1 - TapeTech 8" Angle Applicator w/Handle
• 1 - TapeTech Angle Roller w/Handle

• 2 - TapeTech Standard Flat Boxes (10" and 12")

• 1 - Xtender Flat Box Handle
• 1 - REK2 Kit (Extender Angle Head & Roller Handle)

• 1 - TapeTech Automatic Taper
• 1 - TapeTech Easy Clean ® Pump
• 1 - Cinta Standard Easy Clean Pump
• 1 - Gooseneck & Box Filler
• 1 - TapeTech 3" Easy Roll ® Angle Head
• 1 - Angle Head Handle
• 1 - TapeTech 8" Angle Applicator w/Handle
• 1 - TapeTech Angle Roller w/Handle

• 2 - TapeTech Standard Flat Boxes (10" and 12")

• 1 - Tapetech Fixed Length Flat Box Handle
• 1 - Xtender Flat Box Handle 

• 1 - TapeTech Automatic Taper
• 1- Easy Clean ® Pump,
• 1 - Gooseneck & Box Filler
• 1 - TapeTech 3" Easy Roll ® Angle Head
• 1 - TapeTech MudRunner
• 1 - TapeTech Angle Roller w/Handle

• 2 - TapeTech Standard Flat Boxes (10" and 12")

• 1 - Extender Flat Box Handle
• 1 - REK2 Kit (Extender Angle Head & Roller Handle)

• 1 - TapeTech Automatic Taper
• 2 - Easy Clean ® Pump,
• 1 - Gooseneck & Box Filler
• 1 - TapeTech 3" Easy Roll ® Angle Head
• 1 - TapeTech 8" Angle Applicator w/Handle
• 1 - TapeTech Angle Roller w/Handle

• 2 - TapeTech Standard Flat Boxes (10" and 12")

• 1 - Xtender Flat Box Handle
• 1 - 3" Tapetech Nailspotter
• 1 - 2" Tapetech Angle Head
• 1 - REK2 Kit (Extender Angle Head & Roller Handle)

Attach the Extension to the taper by snapping the two clamps, on the extension, to the butt Extension coupler. The control extension is then wrapped around the taper control tube and snapped tight. Finally, use the snap ring to connect the creaser wheel trigger.

The extended taper is operated the same as the standard taper. Hold the extended taper just below the tape spool and at the butt of the extension. Tape cutting and advancing is performed by using the control extension.

Click Here for Part Diagram of Tapetech Auto Taper Extension

Free Ground Shipping Except AK & HI 

• Monster Mesh Taper applies Fiberglass Mesh Tape faster than any other tool
• It can tape Angles, Flats, and Cut Mesh Tape in one motion.